It is a set of water paper abrasive containing
carbide silicium which provides it with a very
good cutting capacity.
Whether the repairs are small, medium or large,
you can choose the grain of the paper abrasive
which is appropriate to you. The grains available
are: P1200 - P1000 - P800 - P600 - P320 - P220
- P120 - P100 - P80 - P60.
Abrasive Rollers: The mineral used on paper
is an aluminium oxide. The grains available
are: P500 - P400 - P 320 - P220 - P120 - P80
- P60..
Rollers and discs STIKIT: The Stikit support
provides a simple and economic attachment unit.
It is available for both cuts and discs. The
Stikit discs are traditionally presented in
rollers for an easier use. The discs Stikit
3M are manufactured.
Abrasive Discs HOOKIT 255P: These discs are
manufactured in configurations fitting the accessories
and equipment of the main manufacturers of sandpapering
equipments. The grains available are: P500 -
P 400 - P360 - P280 - P 220 - P180 - P120 -
P80.
HOOKIT cuts for drawing up systems: The green
and gold cuts 245P HOOKIT are intended to
be used for the drawing up accessories or
the machines having self-clutching attachment
unit. The grains available are: P500 - P400
- P360 - P280 - P220 - P180 - P120 - P80.
STIKIT plates for discs having a diameter
of 150 mm: They are studied especially to be
used with DTIKIT discs; the vinyl face of the
plate provides an excellent protection of the
disc. The range includes a series of hard plates
for finishing works. They correspond to the
main configurations available on the market.
HOOKIT plates having a diameter of 150 mm:
These plates have been studied to offer a high
performance to the Hookit discs 3M. They correspond
to the main configurations of the manufacturers
of sandpapering equipments of. The yellow and
hard plates are particularly intended for scouring
and repairing. The orange and flexible plates
are intended for finishing sandpapering.
The sandpapering interface: They are especially
adapted to the use of finishing discs as well
as widening the zone of dry mechanical sandpapering
on oranges and flexible Hookit plates.
The products of sheet-iron works
are made of fibre discs. They are abrasive discs
central fixing. They are used with the disc tools
for all operations of scouring and trimming of metals.
They own an abrasive which has a strong capacity
of cutting and an excellent quality of the grain.
They are particularly adapted to the painting and
rust scouring.
The Scotch-Brite rollers have a dimension
of 100 mm X 10 m. The products available are:
Very thin red Scoth-Brite rollers: Various
applications for area preparation, in particular
new parts. They fit in hard areas such as joints
and door interiors where traditional papers
are torn;
Very thin and grey Scotch-Brite rollers:
They fit in preparing connection areas, marking
the. They offer a smooth tarnishing essential
to the painting handing-over.
