|
|
This is a hardener for glycerophthalic
lacquers. It accelerates the hardening of l glycerophthalic
acquers and ensures a long-lasting brilliance.
Moreover, it enables the hardening of alkyds primers
for polyurethane covering and helps the successive
application of many colours. The standard conditioning
is of 1/4 L and 1/2 L. |
|
| It is a hardener recommended for repairs
in open-air drying which can adapt to all working
conditions with a good choice of the thinner<25
°C.
To be used in
- AUTOCOLOR primer 2K in standard process for
temperatures lower than 25°C .
- opaque and metallic colours direct brilliance
of AUTOCOLOR 2K line
- standard clear coat: P190-535
|
|
| It is a hardener recommended
for repairs in cabin, it makes it possible to
adapt to all the working conditions with a good
choice of the diluant.A to use in:
- Finishes AUTOCOLOR 2K for great surfaces
and temperature higher than 25°C
- opaque and metallized colours direct brilliance
of Varnished line AUTOCOLOR 2K
- P190-535 Standard
|
|
| It is a fast hardener which dries quickly
when used for small and average repairs maintaining
an excellent brilliance level.
To be used in:
- Opaque and metallic colours direct brilliance
of the line.
AUTOCOLOR 2K Finishing clear coat (535-598-620).
- Not to be used with primers.
|
|
It is an MS standard hardener recommended
for all types of repairs, up to 25°C. It helps
improve the protective covering capacity of products
with which it is combined. To be used in:
- opaque and metallic colours direct brilliance
of AUTOCOLOR 2K line
- standard clear coat: (MS 598-HS620)
|
|
| It is an MS slow hardener recommended when
the temperature is higher than 25°C for all
types of repairs,
It helps improve the protective covering capacity
of products with which it is combined.
To be used in:
- opaque and metallic colours direct brilliance
of AUTOCOLOR 2K line.
- standard clear coat: (MS 598-HS620)
- AUTOCOLOR 2K primers.
|
|
|
 
|
| |
|
