Beige
synthetic Alkyde : This is a fast synthetic
sub-layer with anti-corrosive pigmentation. It dries
very quickly and is easy to sandpaper. The SURFACER
ALKYDE has pigmentation without chromates and can be
used wet on wet. The standard conditioning of this product
is of 1 kg and 18 kg.
Cellulose primers: The cellulose
primers (brown red and grey) are with fast drying nitrocellulosic
sub-layers with anti-corrosive pigmentation. They are
used for preparation of areas before applying the finishing
lacquer. Drying very quickly and being easy to sandpaper,
the cellulose primers have pigmentation without chromates
and can be used wet on wet. The standard conditioning
of these products is of 1 kg and 18 kg.
| this is an anti-corrosive fixing primer used
for all polyurethanes and synthetic finishing.
The Primoval primer is a reactive protective
primary ensuring a good protection against corrosion.
It clings directly on aluminium alloy, sheet steel
and phosphate and chromate galvanized steel. The
standard conditioning of this product is of 1
kg and 18 kg. |
|
| It is a slightly transparent product containing
nitrocellulosic resins recommended a bottom layer.
This product is intended for preparing bottoms
on any kind of external and interior wood: pieces
of furniture, doors, joineries etc. It is especially
recommended as a sub-layer before painting on
wood. All finishing works are possible providing
the supports are clean and coherent. The conditioning
of product is of 1 kg - 4 kg - 18 kg |
|
| It is a viscous product with two components
containing nitrocellulose and a special alkyde
resin. Being hard with isocyanates, it is recommended
as a bottom sub-layer. |
|
|
