- Coatings and cements of sealing
|
- Under-body Coating: The protection and the
sound-proofing of the parts not given in painting
are realizable with a product based on asphalt.
We offer pulverable coatings or coatings applicable
to brushes or spatulas.
- Under-body aerosols: They are particularly
adapted to final improvement works on small
areas to obtain a black coloured finished textured.
- The anti gravelling textured coatings: These
anti gravelling coatings out of rubber have
a high dry extract with a strong covering capacity.
They are able to bear all types of finishing
frequently used in car repairs without causing
painting discolorations. These coatings provide
a textured finishing or very textured according
to pressure, angle and the spray distance. They
are available in three colours: black, grey
and white.
- Protection products for hollow bodies: wax
for hollow bodies: The hollow body coatings
are intended to renew an anti-corrosive protective
finish at the repaired areas: side frames, bodies,
hatch bottom, door... These products are spread
in capillarity in the cavities and around the
welding.
- Wax aerosol for hollow bodies: The hollow
body aerosols avoid the projection of fogs during
the treatment of the visible parts and allow
a fast repair. They are also adapted particularly
to minor repairs and parts difficult to reach.
|
|
- Polyurethane putty: polyurethane putty 3M
are easy mono-component products, which do not
leak out, they have a smooth aspect and a final
hardness near to the original form. They adapt
to all types of finishing except the products
based on alcohol (nitrocellulosic lacquer).
They can be extruded, then smoothed or brushed..
They fit in with the average and large seals.
They are available in 3 colours: black, grey
and white.
- Brush putty: They are frequently used by
manufacturers to seal sheet junction, on floors,
trunks, shock absorber heads. Brush putty remains
an essential product in car repairs. They protect
perfectly the metal and resist to water, oils
and fuels. Being able to be applied on strong
thick areas, this putty does not flow, dries
quickly and has a high final hardness.
- Spray putty: in their exclusive aluminium
conditionings, these putties help to reproduce
the original sprayed joined aspects of sheet
covering around the shock absorbers heads, trunk
funds... the pre-proportioned packet avoids
breathing isocyanates. It can also be used in
coating anti-gravelling resistance, for front,
back and bottom of the car body.
|
|
| It is product designed particularly
against the corrosion of panels before welding the
internal parts of the vehicle thanks to an easy
and quick application. It helps improve the welding. |
|
 |
|
|
| |
|
